Soluble polyimide as liquid crystal perpendicular alignment layer

Journal of Materials Science - Three polyimides (PIs) were prepared from a diamine containing biphenyl ester group as a side chain and a corresponding dianhydride chosen from...     

Destination-aware metric based social routing for mobile opportunistic networks

Wireless Networks - Although centrality is widely used to differentiate the importance of nodes for social-aware routing in mobile opportunistic networks (MONs), it is destination-agnostic since...     

Fabrication and properties of diatomite ceramics with hierarchical pores based on direct stereolithography

Porous diatomite ceramics with hierarchical pores and high apparent porosity (50.29–56%) were successfully fabricated via direct stereolithography. The pre-ball-milling time, dispersant type and dispersant concentration were systematically investigated to prepare diatomite pastes with high solid loading, low viscosity and a self-supporting effect. The results showed that a pre-ball-milling time of 24 h was more suitable to prepare diatomite pastes with high solid loading, and Span80 at 2 wt% was the optimal dispersant to obtain 40 vol% diatomite paste with a low viscosity and a self-supporting effect. To restrain the formation of defects, a heating rate as low as 0.2 °C/min was allowed to control the pyrolysis rate in the multistage debinding process. At sintering temperatures ranging from 900 °C to 1000 °C, porous diatomite ceramics exhibited a typical bimodal porosity, high apparent porosity and great flexural strength.     

Priority-MECE: A Mobile Edge Cloud Ecosystem Based on Priority Tasks Offloading

Mobile Networks and Applications - With the rapid development of Internet of things, the traditional city model is no longer applicable. Therefore, the emerging concept of smart city meets the...     

Phosphorus-doped silicon nanoparticles as high performance LIB negative electrode

Journal of Materials Science - Silicon is getting much attention as the promising next-generation negative electrode materials for lithium-ion batteries with the advantages of abundance, high...     

High Q×f values of Zn-Ni co-modified LiMg0.9Zn0.1-xNixPO4 microwave dielectric ceramics for 5G/6G LTCC modules

In this work, Zn-Ni co-modified LiMg_0.9Zn_0.1-xNi_xPO₄ (x = 0–0.1) microwave dielectric ceramics were fabricated using a solid state synthesis route. Rietveld refinement of the XRD data revealed that all ceramic samples have formed a single phase with olivine structure. SEM images showed that the samples have a dense microstructure, that agrees with the measured relative density of 97.73 %. Based on the complex chemical bond theory, Raman and infrared reflectance spectra, we postulate that ε_r is mainly affected by the ionic polarizability, lattice and bond energy, while P-O bond plays a decisive role in Q×f and τ_f value. Optimum properties of Q×f ~ 153,500 GHz, ε_r ~ 7.13 and τ_f ~ ?59 ppm/°C were achieved for the composition LiMg_0.9Zn_0.06Ni_0.04PO₄ sintered at 875 ℃ for 2 h. This set of properties makes these ceramics an excellent candidate for LTCC, wave-guide filters and antennas for 5 G/6 G communication applications.     

Isolation and identification of Lactobacillus and yeast species and their effect on the quality of fermented rice cakes

In this study, microbes were isolated from the rice slurry of a fermented rice cake to obtain lactic acid bacteria and yeast species. These species were identified using microbial physiology and gene sequence analyses. As the growth of the lactic acid bacterial strain R-2b and the yeast J-3a strains were found to be the best, a composite starter comprising these microbes was used for the preparation of fermented rice cakes. Based on single factor and orthogonal experiments, when the proportion of Lactobacillus plantarum, Saccharomyces cerevisiae, and Candida humilis was 1:3:6, the optimal fermentation conditions were addition of sugar and starter amounts of 20% and 6%, respectively, a fermentation temperature of 32 °C, and fermentation time of 8 h. The fermented rice cake with this optimum ratio had the most abundant volatile components and qualified physicochemical and microbial indexes. Additionally, the overall quality was better than that of commercially available products.     

How scientific research incorporates policy: an examination using the case of China’s science and technology evaluation system

Scientometrics - Governments typically formulate sets of policies to guide the direction of scientific research. And the possible effects of these policies on scientific research have been...     

Coupling Characteristics of a Co-flow Water Mist System and Normal Temperature Counter Air Jets

Fire Technology - A co-flow water mist system is considered a clean and efficient emergency handling measure for preventing and controlling the leakage of hazardous gas. To reveal the coupling...     

Preparation of high-purity SiC ceramics with good plasma corrosion resistance by hot-pressing sintering

High-purity SiC ceramic devices are applied in semiconductor industry owing to their outstanding properties. Nevertheless, it is difficult to densify SiC ceramics without any sintering additive even by HP sintering. In this work, high-purity and dense SiC ceramics were fabricated by HP sintering with very low amounts of sintering aids. Residual B content was only 556 ppm and relative density was more than 99.5%. Furthermore, thermal conductivity of as-prepared SiC ceramics was improved from 155 W m^?1 K^?1 to 167 W m^?1 K^?1 by increasing holding time and their plasma corrosion resistance was promoted in the meantime. The as-prepared high-purity SiC ceramics have broad application prospects in the field of semiconductor industry.